GROUND CLUSTER BARS AND SUPPORTS
• Provides protection for operating personnel during
grounding procedures and practices
• All ground clusters and supports utilize an adjustable
chain tightener with 36” of chain
• Compact aluminum alloy cluster bar is 5/8” diameter.
Bar accepts both “C” and duckbill type ground clamps.
Tested for 43KA@ 15 Cycles.
• Aluminum base with a 5/8” diameter solid copper
alloy bar. Bar accepts both “C” and duckbill type
ground clamps. Copper bar will hold up to four
clamps. Tested for 43KA@ 15 Cycles.
| CAT NO |
DESCRIPTION |
LBS |
| 6767 |
COMPACT CLUSTER BAR |
6.8 |
| 6754 |
ALUMINUM BASE CLUSTER BAR |
8.0 |
4-WAY CABLE SPLICE FOR THREADED TERMINATIONS
• Used for connecting ground cables together
• Four terminal positions
• Terminals are tapped for use with 5/8-11 NC threaded
grounding ferrules
• Aluminum alloy
• Splice has cable pads for stress relief of ground cables
• Tested at 43KA@ 15 Cycles
| CAT NO |
DESCRIPTION |
LBS |
| 6724-1 |
FOUR WAY CABLE SPLICE |
0.8 |
4-WAY CABLE SPLICE FOR BOLTED TERMINATIONS
• Used for connecting ground cables together
• Four way cable splice
• 2/0 cable maximum
• Tested at 28,900 Amps for 15 Cycles
• Bronze alloy
| CAT NO |
DESCRIPTION |
LBS |
| 5755-6 |
GROUND CABLE SPLICE |
3.0 |
GROUND CABLE SPLICE
• Used for connecting two ground cables together
• 4/0 cable maximum
• Aluminum alloy
• Tested at 43KA@ 15 Cycles
| CAT NO |
DESCRIPTION |
LBS |
| 12423 |
GROUND CABLE SPLICE |
1.0 |
