CAPACITOR DISCHARGE TOOL
• The capacitor discharge tool is designed to safely drain the capacitive charge after the circuit is de-energized
• An optional add on resistor to limit discharge current is available
• Factory assembled to include the following components: Fiberglass Pole with hand guard, 1/4” Stainless
Steel Hook with a 1 3/8” opening, Rubber Tool Holder, #2 Str. Copper Grounding Cable with safety yellow
neoprene jacket, 2 hole Tin Plated Copper Lug is terminated on one end with a heat shrink sleeve
• For Custom Build - Contact factory with required clamp, length of fiberglass pole and required length of
grounding cable for a part number
| CAT NO |
DESCRIPTION |
LBS |
| CUSTOM BUILD |
CAPACITOR DISCHARGE TOOL FOR CUSTOM BUILD - CONTACT FACTORY |
|
| 1004 |
DISCHARGE TOOL - 2’ FIBERGLASS POLE
WITH 6’GROUNDING LEAD (CLAMP NOT
INCLUDED) |
2.7 |
| 6753 |
ADD ON RESISTOR - RATED AT 10KV, 10 MEGOHM |
0.7 |
| P30128 |
REPLACEMENT RUBBER TOOL HOLDER |
0.1 |
| CAT NO |
DESCRIPTION |
LBS |
| CUSTOM BUILD |
ELECTRO STATIC PRECIPITATOR
GROUNDING TOOL FOR CUSTOM BUILD - CONTACT FACTORY |
|
| 6768 |
ELECTRO STATIC PRECIPITATOR
GROUNDING TOOL 4’ FIBERGLASS POLE, WITH 6’
GROUNDING LEAD, AND C-HEAD GROUND CLAMP MODEL 21575 |
10.0 |
ELECTRO STATIC PRECIPITATOR GROUNDING TOOL
• Designed to safely remove the static charge after de-energizing for service work
• Grounding tool is factory assembled to include the following components: Brass alloy “U” shaped hook
to engage precipitator plates, Fiberglass pole for installation, #2 Str. Copper Grounding Cable with safety
yellow neoprene jacket, Ground Clamp
• For Custom Build - Contact factory with required clamp, length of fiberglass pole and required length of
grounding cable for a part number
| CAT NO |
DESCRIPTION |
LBS |
| CUSTOM BUILD |
ELECTRO STATIC PRECIPITATOR
GROUNDING TOOL FOR CUSTOM BUILD - CONTACT FACTORY |
|
| 6768 |
ELECTRO STATIC PRECIPITATOR
GROUNDING TOOL 4’ FIBERGLASS POLE, WITH 6’
GROUNDING LEAD, AND C-HEAD GROUND CLAMP MODEL 21575 |
10.0 |
