ARMOR ROD APPLICATOR
?nbsp; Designed to facilitate application and removal of
factory formed conductor ties and armor rods
CAT NO DESCRIPTION LBS
10-096 ARMOR ROD APPLICATOR 0.6
UNIVERSAL COTTER KEY INSTALLER-PULLER
?nbsp; Used for 1/8 cotter keys in clevis pins of distribution hardware
CAT NO DESCRIPTION LBS
12425 UNIVERSAL COTTER KEY
INSTALLER-PULLER
0.5
UNIVERSAL COTTER KEY PULLER
?nbsp; Used for removal of cotter keys on ball socket and clevis
type suspension insulators and hardware
?nbsp; Adjustable for compound angles
CAT NO DESCRIPTION LBS
5455-8 UNIVERSAL COTTER KEY PULLER 0.5
UNIVERSAL COTTER KEY INSTALLER-PULLER
?nbsp; Used for 3/16?cotter keys on clevis type fittings
?nbsp; Spring loaded
CAT NO DESCRIPTION LBS
5455-21 UNIVERSAL COTTER KEY INSTALLER-PULLER 0.8
UNIVERSAL NX FUSE PULLER DISCONNECT HEAD
?nbsp; Used for removing and installing NX sand fuses on URD
switch gear
CAT NO DESCRIPTION LBS
13489 UNIVERSAL NX FUSE PULLER
DISCONNECT HEAD
0.3
UNIVERSAL COTTER KEY PUSHER
?nbsp; Used for transmission insulator strings
?nbsp; Pushes legs on cotter key partially out of socket so ball
can be disconnected
?nbsp; Slot can face to either side or rear
CAT NO DESCRIPTION LBS
12737 UNIVERSAL COTTER KEY PUSHER 1.1
UNIVERSAL BOLT HOLDER
?nbsp; Used for replacing pins on clevis type hardware
?nbsp; Jaw is spring loaded
CAT NO DESCRIPTION LBS
5455-2 UNIVERSAL BOLT HOLDER 1.5
UNIVERSAL LOCATING PIN
?nbsp; Used to align joints and holes on clevis type
suspension insulators and hardware
CAT NO DESCRIPTION LBS
5455-15 UNIVERSAL LOCATING PIN 0.5
UNIVERSAL BALL SOCKET FORK
?nbsp; Used to align and hold ball socket fittings for
removal of cotter pin
CAT NO DESCRIPTION LBS
5454-2 UNIVERSAL BALL SOCKET FORK 0.6
UNIVERSAL BALL SOCKET ADJUSTER
?nbsp; Used to support and align ball socket adapter between ball
fitting on disc insulator and clevis fitting on suspension or
strain clamp
CAT NO DESCRIPTION LBS
5455-29 UNIVERSAL BALL SOCKET ADJUSTER 0.9
UNIVERSAL 90 DEGREE ADAPTER
?nbsp; When mounted on universal sticks, this adapter will allow
fittings to be set at almost any angle
CAT NO DESCRIPTION LBS
5454-6 UNIVERSAL 90 DEGREE ADAPTER 0.4
UNIVERSAL CRESCENT SKINNING KNIFE
?nbsp; Used to skin conductors before installing hot line clamps
and connections
?nbsp; Replaceable blades
CAT NO DESCRIPTION LBS
5454-5 UNIVERSAL CRESCENT SKINNING KNIFE 1.0
1-08402 REPLACEMENT BLADE 0.1
