UNIVERSAL VISE GRIPS
?nbsp; 10?size holds split bolts and parallel groove clamps
?nbsp; 7?size for cotter pins
CAT NO DESCRIPTION LBS
5455-99 7?UNIVERSAL VISE GRIPS 1.2
5455-98 10?UNIVERSAL VISE GRIPS 1.7
UNIVERSAL BALL PEEN HAMMER
?nbsp; Used for light impact around energized equipment
?nbsp; Made of silicon bronze
CAT NO DESCRIPTION LBS
5454-3 UNIVERSAL BALL PEEN HAMMER 1.6
UNIVERSAL PAINT BRUSH
?nbsp; Used to paint portions of structures close to
energized lines
?nbsp; 3?Brush
CAT NO DESCRIPTION LBS
5455-25 UNIVERSAL PAINT BRUSH 0.4
UNIVERSAL SCREW DRIVER
?nbsp; Use to tighten and loosen screws
?nbsp; 3/8?wide
CAT NO DESCRIPTION LBS
5455-28 UNIVERSAL SCREW DRIVER 0.5
UNIVERSAL HACK SAW
?nbsp; Cuts bolts and pole line hardware
?nbsp; 10?blade
CAT NO DESCRIPTION LBS
5454-7 UNIVERSAL HACK SAW 0.7
UNIVERSAL RATCHET WRENCH
?nbsp; 1/2?square drive
?nbsp; Use with standard wrench sockets
?nbsp; Reversible ratchet
CAT NO DESCRIPTION LBS
5455-6 UNIVERSAL RATCHET WRENCH 2.0
UNIVERSAL SOCKET WRENCH
?nbsp; 1/2?square drive
?nbsp; Used with standard wrench sockets
CAT NO DESCRIPTION LBS
5455-46 UNIVERSAL SOCKET WRENCH 0.8
UNIVERSAL BOLT HEAD WRENCH
?nbsp; Used to tighten through bolts
?nbsp; Head wedges against bolt head to keep it from turning
CAT NO DESCRIPTION LBS
5455-74 UNIVERSAL BOLT HEAD WRENCH 0.9
UNIVERSAL INSULATOR FORK
?nbsp; Clamps around 10?disc insulators between porcelain
and cap to remove single unit or hold insulator in align-
ment as cotter key is replaced
CAT NO DESCRIPTION LBS
5455-1 UNIVERSAL INSULATOR FORK 3.3
UNIVERSAL INSULATOR CONTROLLER
?nbsp; Grips cap of suspension insulator to aid in controlling,
aligning, etc.
?nbsp; Jaws are adjustable for various angles
CAT NO DESCRIPTION LBS
5455-35 UNIVERSAL INSULATOR CONTROLLER 3.4
UNIVERSAL SHEPHERD HOOK
?nbsp; Fits around caps of suspension insulators to aid in con-
trolling strain or suspension strings being removed
CAT NO DESCRIPTION LBS
5455-31 UNIVERSAL SHEPHERD HOOK 2.3
HAMMER HEAD WRENCH
?nbsp; Jaw opens to 1 3/4?wide
?nbsp; Wrench is 12?long
CAT NO DESCRIPTION LBS
10-312 HAMMER HEAD WRENCH WITH SLIP
FIT FOAM RUBBER GRIP HANDLE
2.0
10-312-1 HAMMER HEAD WRENCH WITH
URETHANE DIPPED HANDLE
2.0
